For sale & wanted
Date: 02nd June 15
Headline: Cowndens Bird of Prey for sale
User: Damian Cownden
This bike has won at least 11(+?) championships in North America between Ron Houniet and current owner Damian Cownden. It has run 6.20's five years in a row from sea level to nearly 6000' corrected. The frame was front halfed by John Storace approx 3.5 years ago. New body work 2 years ago. 14" wide rear wheel. 175" Prp. Crank is 1.5 years old, recently magnafluxed and never popped. New heads/Barrels last year, never torched. Stroud parachute.
Complete spare Top End, complete spare body work (Weekend round style), Complete spare rear wheel and tire, 500 good used clutches, Extra new pistons, rings, used rocker arms, lifters, lifter blocks, oil pump, fuel pump, fuel cell. Extra input/output shafts, sprockets, belts, complete spare Race Pak data logger, and tons more smaller items.
This bike comes with a lift and starter cart, and a weekend with me at any track in the world if you pay for the plane ticket and shipping. Of course all my data including the laptop and it is all 110% current with not one single part changed. We have won 3 of 4 NHRA events this year with a Rookie rider, 6.30's over 220 in his first two TF races ever!
$75,000 US for bike and all parts. I will sell just the bike and Cart with no parts but prefer to sell it all. Please only contact me if you are extremely serious and capable.
Date: 05th August 14
Headline: HD Buell Top Gas for sale
User: Guy Hoar
Harley Davidson Buell, 114 cubic inch Top Gas Drag Bike. Axtell Barrels, 96.93 bore, 5 inch stroke, JE Pistons, 96.65 piston, Jims Cams, Dyna Tech Ignition(dyna 4000 pro), Bandit lock up clutch, Mega Squirt Fuel Injection, C14 Fuel, White Power Fork Springs, GSXR Rear Wheel, Pro Flow Oil Pump, S&S Fly Wheel(crank shaft) off Board Start Gear, Dyna Tech Air Shift, Zippers Wet Sump Control Kit, Zippers Trap Door, Joey Bonn Frame, spare clutch plates, Dual Plug Heads, On Board ECU, 10 Gallons of Fuel, Oils, Andrews Recut Gears.
Needs piston rings and re-assembly to race,
Any questions contact Guy on +447711853541 or email at email@example.com
Date: 01st June 14
Headline: Sidedrive Beadlock wheel wanted
User: Phil Baimbridge
I require a 13" or 14" wide, 15" diameter sidedrive beadlock rear wheel suitable for a Top Fuel bike.
Prefer early PM design, but will consider anything.
Date: 14th May 14
Headline: Complete clutch for HD
User: Bruno Salesse
For sale, 6" clutch with 2 pulleys (57x76, 8mm), for PRP or Overkill (bolts or splines), with a lot of drive (30) and friction (13) plates, 2 Gates belts 1120-101.4, 8mm tooths.
Parts are news or just lightly used. 1200€ or make an offer,
Date: 11th May 14
Headline: Racetruck for sale
User: Frank Brachtvogel
Ford Iveco 75E17 20ft box with taillift 2002, partly converted windows fitted for living up front.
New discs, pads & callipers on rear axle.
New exhaust down pipe, all good tyres etc
been stored for 3 years no mot
Phone Frank Brachtvogel on 07932354284 or email firstname.lastname@example.org
Your For sale & entry
You can submit your own for sale entry here. Please take care that your email adress is valid and that you post an
image in order to amplify your sale entry. The image should not be larger than 100KB and not wider than 560 Pixels.
We will check your entry and set them free in time.
April 7 - 9:
Man Cup, SGMP Spring Cup, Valdosta, GA
June 3 - 4:
Man Cup, Memphis Internationals
July 15 - 16:
Man Cup, MTC Nationals, Galot Dragway, NC
Sept. 23 - 24:
Man Cup, Rock, Rockingham, NC
Nov. 17 - 19:
Man Cup, SGMP World Finals, Valdosta GA